Session 5.3 - Collecting and interpreting information
The OER4Schools Professional Learning Resource
Learning intentions and objectives.
In this session you will learn about:
- learn about what to look out for in collecting and interpreting data in an enquiry-based lesson
- continue to help participants to prepare for an enquiry-based learning session through a series of lessons, a ‘project day’ or ‘field trip’ for their maths or science classes.
Success criteria.
To meet the learning intentions you will:
ICT components.
The ICT components you will focus on are
- Geogebra and polygons
- Use of online simulations for EBL
- Classroom use of Geogebra, spreadsheets, concept mapping,slideshows,
EtherPad Classroom based activities (with your students, after this session):
- you will ...
Resources needed for this session:
- Papers of different sizes (at least two pieces of paper for each teacher),
- Different coloured pens (at least one for each teacher),
- Computer/laptop/netbook and the Internet.
Property "Todoinfo" (as page type) with input value "</br></br>We should relate some of this to the 'dynamics of group decision making', with a divergent and convergent phase.</br></br>" contains invalid characters or is incomplete and therefore can cause unexpected results during a query or annotation process.
Review of follow-up activities from last session
If you are running a professional learning programme which follows these sessions in sequence, then you should do the review of follow-up activities relating to the (Category:OER4S CPD). The 'review of follow-up activities' for that session is available, and also shown below in the session text. However, if you are following selected sessions in a different order, then you should use the reflection appropriate to the previous session you did.
The review of the follow-up activities for this session (to be done at the start of the next session) is available here.
There is no review of follow-up activities from last session available. You can go to the previous session () and.
Further Tasters of EBL: Investigating perimeter
Same-task group work (20 min) on investigating perimeter
Working in your small groups of three to four participants, complete the following activity which uses GeoGebra. In this activity, we would like you to experiment with drawing figures with different numbers of squares (you can click and drag them into position) and observing how the perimeter changes.
Take some time to explore the applet and think about the type of enquiry that it lends itself to (demonstrated enquiry/structured enquiry/problem-solving enquiry/independent enquiry) and how you might use it with your students. Do you think the results table is a useful addition to the applet? Share your findings with the other participants and share whether such an activity can be used in the class as a taster of what EBL is about.
You may like to refer to the following guidance notes for some ideas on how to make use of this investigating perimeter GeoGebra resource:
1) Overview
After learning the concepts of perimeter and area, it is easy for students to think that figures with larger perimeters would also have larger areas, and vice versa. This applet helps teachers to explore with students the variety of the perimeters of a figure formed by several congruent squares touching side by side. Together with the complementary applet Variety of areas with fixed perimeter, teachers can clarify with students that a figure with a larger area may have a smaller perimeter, and areas and perimeters are two different concepts.
2) Learning Objectives
- Recognise that figures with the same areas could have different perimeters.
- Recognise the strategy of minimizing the perimeters of figures with the same areas.
3) Teaching Approach
An enquiry teaching approach is expected. Students are asked to arrange 3 to 9 squares to form different figures and find their possible perimeters. Teacher then guide students to express their strategies of getting the largest and smallest perimeter with a certain number of squares.
4) Teacher’s Note
For each number of squares, ask students to record the possible perimeters in the table of the applet. Guide students to focus on the change of the perimeter when a square is dragged to a new position. Discuss with students the strategy of minimizing the perimeter, especially for 4 and 9 squares.
Note that while the instructions for the task are short, it will take some time to complete the task. Make sure you limit the time appropriately, so that there’s enough time for the remainder of the workshop.
The following task may be used as an alternative if preferred or if there is no GeoGebra resource:
Investigating volume and surface area of paper boxes
Each group of participants should have access to papers of different sizes. Each participant should fold a paper box using each of the papers. Use an appropriate method to measure the area of paper and volume of the paper box. Would the size of the paper affect the volume of the paper box? Or would it be dependent on how your fold the paper? What is your initial ‘best guess’ or hypothesis? How will you go about finding out whether your guess or hypothesis is correct? Share your findings with the other participants and whether such an activity can be used in the class as a quick taster of what EBL is about.
Simple Data Collection Exercise
Same-task group work (10 min) on data collection This is a fast and simple activity in which you (or your students) fill in the blanks, and you learn more about each other. On a piece of paper, draw a simple profile of yourself (forehead, nose, mouth, and chin). You and your group members should choose at least four items from the following list of possible information about each other, and write them inside the profile using coloured pens:
- Name
- Favourite time of day
- Favourite colour
- Favourite sport
- Favourite subject
- Something I did that I'm proud of
- Birthplace
- Something that makes me laugh
- Favourite food
- Favourite animal
- Favourite song
You can post the profiles in the classroom or create a display section in a suitable venue in your school along with your picture (or your students’ pictures). For another variation, you can use a spreadsheet, to consolidate a particular aspect of the profile of the class (e.g. favourite time of day, favourite food). These can be shown on a regular basis as ‘data’ from your class. (e.g. My classmates all like to eat ’nsima’)
Now try to come up with some interpretation of the data from all the profiles in your group.This is a great way to get to know each other and also the group as a whole.
Data Collection
Whole class dialogue (10 min) on data collection Data collection is an essential part of many EBL activities. It is important that data is carefully and accurately collected. Otherwise, the interpretations and conclusions you draw from your enquiry can be very misleading! For instance, you would not want your profile in the previous activity to contain any mistakes about yourself! Some common methods of data collection include: reading reference material in a library or on the Internet, conducting an interview, using questionnaires or conducting an experiment. Discuss with each other whether you are familiar with each of these data collection activities. It is important to give students ownership of how they prefer to collect and record their findings by giving them options to choose from. It is also important for teachers to discuss with them the reasons for collecting or recording findings, because they may not understand why they need to collect or record findings in a particular way.
Now watch this video clip on Nixolo helping students to collect data in her EBL lesson, bearing in mind the questions below:
VIDEO
Recording findings
Recording information during an enquiry. Noxolo encourages a group to record their findings. She checks who in the group is supposed to keep the records of the investigation.
Video/Noxolo 3D shapes 1.3 AfL3 recording.m4v, https://oer.opendeved.net/wiki/Video/Noxolo_3D_shapes_1.3_AfL3_recording.m4v,This video is available on your memory stick in the video/3D shapes folder. Duration: 0:40 watch on YouTube, local play / download options / download from dropbox)(Series: 3D shapes, episode 13)
Discuss these questions:
- Why do you think it is important for students to record their findings during the enquiry process?
- Are the students in the clip motivated to record their findings?
- Can you think of ways to help the students engage with the recording information part of the enquiry process?
Collecting and Interpreting Data: Part one
Recall the four enquiry ideas (A-D) that were discussed in the last session. Get back into the small group you were in the last session. We will assume your group has been able to develop one or two of these ideas into enquiry-based lesson(s) and you now want your students to start collecting data to answer the enquiry questions.
Idea A: Investigating paper airplanes
There are many different designs for paper airplanes. Some of them have a very plain design but can fly a longer distance whereas some can have a rather interesting design but not fly as well. What are the factors that affect how far a paper airplane can fly?
Idea B: Investigating the process of hand washing
We have been told that washing of our hands is an important part of maintaining hygiene and preventing the spread of germs and viruses. How do you know that you have spent adequate time washing your hands each time?
Idea C: Investigating the vegetables and trees within our community
What are some of the vegetables and trees that are grown in our community and why are they being grown here? (e.g. consider tomatoes, rape, onion, cabbage, nimu tree, holy fiso, malaina, mango) Some possible areas of investigation: location of vegetable/trees (e.g. type of soil and availability of water source like stream), medicinal properties (e.g. is it used as a traditional medicine?), nutrition properties, economic consideration (e.g. source of fuel/income), ecological and environmental concerns, personal and spiritual values.
Idea D: Planning for a trip to the game reserves and Victoria Falls
Imagine you have two overseas friends who have just arrived in Lusaka and would like to visit a game reserve near Lusaka, the Victoria Falls and one other interesting site. The visitors only have one day to visit these three places by car. Can you recommend the third place to visit and inform the visitors the distance to these places from Lusaka city centre? Can you also suggest an itinerary that will take into consideration the shortest distance of travel to and between the three places, starting and ending at Lusaka city centre ? Please state the distance of travelling to each place and the approximate time required to travel.
Also think about the practical arrangements: how much luggage (water, food, equipment) will you need to take and how will you be able to carry this? Are there any elderly people or young children in your party, who might need special provision, such as extra food, or more frequent stops?
Same-task group work (10 min) on data collection Discuss in your groups the following questions:
- What form of data collection will the students need to work on? Do they need to identify sources of information or conduct some sort of experiment or calculation?
- If it is a form of experiment or calculation, do they have the necessary skills or knowledge to conduct the experiment or calculation? How will they record their results? How will I make sure to integrate ICT into this process? Would the use of a spreadsheet help students to keep track of and if necessary further process results?
- If it involves identifying sources of information, where do they find the information? How do they know the information is valid and how can they access the information?
- What other ways of finding information are there?
An enormous amount of valuable, deep and exciting information is available on the Internet, but an enormous amount of total nonsense, falsities, half-truths and unsupported theories is also out there. Your students have to learn to distinguish between the two, but you cannot give them hard-and-fast rules. Everything that comes out of an established publishing source isn't good information, and everything that comes from a personal home page isn't bad information. The kinds of things that students ask may be answerable only by other people, perhaps only by a knowledgeable person other like a teacher, parent, medical specialists, etc.
Same-task group work (20 min) on assessment of responses After the discussion, assess if the resources that you have prepared so far would be adequate for the students to embark on the data collection process (whether is it in the form of experiment or enquiring through the Internet/asking people). If not, make some changes or consider creating additional worksheets or perhaps a spreadsheet for the students. You should make sure that you have included an ICT element in each of your enquiry ideas.
Imagine that you are the students who are going through the data collection process. Now go ahead and complete the experiment or data gathering. By the end of the workshop, you should have the full data set and findings that you could share with the other groups next week.
Some post-activity questions for discussion (if there is time):
- What kind of challenges can you anticipate your students will face when completing this phase of the enquiry-based learning lesson?
- How can you support your students as they face these challenges?
- Does the use of ICT in your activity support students’ learning?
Collecting and Interpreting Data: Part two
Same-task group work (10 min) on collecting and interpreting data You have now collected the data and should be ready to analyse or find solutions to respond to appropriately during the enquiry. Where should you begin and how do you proceed with this section of the enquiry?
The follow are the steps in the scientific method as usually followed in many scientific investigations and enquiries. They are not in the right order. Working in small groups, arrange the steps in the right order by putting the numbers 1-8 next to them.
- Data is analysed.
- The investigation is done (using whatever equipment/materials you have chose to use) and data is collected.
- A hypothesis is formed - this is usually a best guess based on what’s already known.
- Results are communicated.
- A question or a problem is posed.
- Conclusions are reached.
- Research is done to find out what is already known about the topic.
- A very detailed step-by-step experimental procedure is designed to test the hypothesis – this is the scientific enquiry or investigation and must take into account all variables affecting the experiment.
Here are the steps (in order) in the scientific method as usually followed in many scientific investigations and enquiries:
- A question or a problem is posed.
- Research is done to find out what is already known about the topic.
- A hypothesis is formed - this is usually a best guess based on what’s already known.
- A very detailed step-by-step experimental procedure is designed to test the hypothesis – this is the scientific enquiry or investigation and must take into account all variables affecting the experiment.
- The investigation is done (using whatever equipment/materials you have chose to use) and data is collected.
- Data is analysed.
- Conclusions are reached.
- Results are communicated.
You should observe that the steps are very similar to the EBL steps. The steps in italics should be a particularly helpful reminder to what enquiry activities you have carried out, in the context of a scientific investigation method.
Before you carry on to analyse your data, discuss these questions:
- What is your ‘best guess’ at this point in time? Why?
- Do you think the data help you to respond to the enquiry? Why?
- How do you know that you can ‘trust’ the data that has been collected? Why?
- What is the best way to make sense of the data so that you are able to find some solutions to the enquiry?
Use the following information if required:
The analysis of the data involves responding to the questions above. These questions help you evaluate your guesses, and assess whether the data collected is valid (ie. whether it can actually answer the enquiry questions) or reliable (ie. whether the data comes from a rigorous and trustworthy method of data collection). If you do not think the data fulfills the qualities of validity and reliability, then you should immediately highlight the problem and try to find out why this could have happened. It may be that you need to to rethink or repeat the data collection process. If you are satisfied with the data collected, you can then go ahead to make sense of the data so that you are able to present a solution, or different solutions, to the rest of the participants next week.
Remember, to ensure that the data collected is reliable. It may be necessary to repeat the experiment a number of times. Averages can then be calculated if further processing is needed - for example in the paper airplane enquiry. To ensure that the data is valid, make sure to consider all the possible variables and which ones to control.
Making use of ICT in Enquiry-Based Learning
Same-task group work (20 min) on making use of ICT in EBL Go to the ‘Balancing Act’ simulation by following the link below. Play with the simulation for a few minutes and think about how you might use it in an EBL lesson. Can you come up with one or two enquiry questions that could be investigated using the simulation? Discuss with your colleagues how students would record their answers to these questions.
http://phet.colorado.edu/en/simulation/balancing-act
If time permits, think about reviewing the two gold star rated resources (Teaching Ideas) that accompany the simulation to see how they could be good exemplars for your EBL lesson.
http://phet.colorado.edu/files/activities/3485/Balancing%20Act_Sample_Lesson.pdf
These are some possible extension activities you can choose to do in your own time:
1. Study other simulations that have been developed in the web page:
http://phet.colorado.edu/en/simulations/category/new
2. Come up with some headings under which to review the simulations and resources that this website pages could offer for an EBL lesson. For instance, you could assess the simulations and resources in terms of:
- the level of enquiry they promote,
- ways of extending/differentiating the level of enquiry,
- how user friendly it is for yourself and students,
- how engaging it will be for the students,
- the relevance to your teaching subjects or curriculum in general.
Connecting with overarching goals of the programme
Open space (10 min). It's now time for the "open space", that gives you an opportunity to discuss issues that have arisen, and to relate those to the broader context of the programme. Do not just gloss over this section, but make time to raise issues, and probe the progress that you are making. You could use this space to:
- Remind yourselves of the of the Most Significant Change Technique, and e.g. collect more of your stories.
- Discuss your assessment portfolios: Is there anything that you are unsure about? Is it going well? What could be done better?
- Check on the work with the classroom assistants: Is this going well? Are there any tensions? Any observations or tips you can share?
- Reviewing individual ICT practise (such as typing practise).
- If you are preparing a presentation for other teachers, you could work on the presentation (about what you have been learning, stories emerging from MSC).
- Remind those who are doing audio diaries, to upload them.
- You could discuss any other issues that have arisen.
You will find notes and summaries of various techniques and concepts on our reference page, and you might want to refer to those for clarification during this activity if needed.
Follow-up activities
Agreeing follow-up activities (5 min).
Participants should set concrete days for their Geogebra day, as well as for the project day. Part 1 of the investigation should be carried out between 5.3 and 5.4. As you go through the homework, explicitly discuss days or lessons which teachers can set aside for this.
Part A: Try out in your classroom the same mini-GeoGebra enquiry as in the first taster EBL activity above, with learners working in mixed groups of 3-4 around a computer. Consider the following question: how did your students respond to the open nature of this task? What other observations can you make that will help you evaluate the use of Geogebra to explore this topic. Note down the responses and observations. In the next session you will share this with the others.
Part B: Tidy up and make sense of the data for the group enquiry activities you have worked on in this session and be ready to present them next week. Decide on what would be the best way to present your ideas (e.g. charts, OpenOffice presentation) so that you can present your findings next week.
Part C: Continue to work on planning for a ‘project day’ or ‘field trip’ and share any development of ideas in the next session. It may be that you have introduced some form of EBL whether in the form of a mini EBL (as in Part A of this homework) or the ‘project or field day’. Be ready to share the positive, minus and interesting (PMI) points that you have noted so far when introducing EBL in your classrooms. The following additional set of questions can be considered for thinking and sharing of PMI, if you have already started to make use of EBL in your lessons:
- How are the students involved in framing the enquiry tasks and questions? (e.g. could groups or individuals generate and record ideas about "what I/we want to know"? Or in the case of a whole class investigation, could the class vote on which enquiry is the most interesting yet feasible to pursue? )
- Are the tasks open-ended enough so that students could also take some responsibility for how they develop, rather than just producing an answer or a solution? (open-ended tasks can still contain guidance)
- Can students conduct experiment, search for information or resources themselves?
- Can students interpret the information or data themselves?
- Can you persuade students to ask more questions without feeling shy or stupid?
- Can you show students that you can be a learner alongside them?
- Are the resources - inside and outside the classroom, human/material/digital - sufficient and accessible to all of them?
- Can you, and the rest of the class, give comments or criticisms that are constructive and sensitive? Can the group be encouraged to take on board constructive feedback?
- Are the students motivated to suggest more enquiry ideas of their own?
Part D: Carry out Stage 1 of your ‘project day’ or ‘field trip’. You could do this across a couple of lessons (or the longer sessions which we have arranged for in the timetable), or by setting half a day aside for this.
In the next session, these follow-up activities will be reviewed. If you are using this session on its own, you can have a look at the review of follow-up activities here.
At the end of each session, we provide an overview of the activities in this session, together with their suggested timings. Although this appears at the end of the session (for technical reasons), you should keep an eye on this throughout the session, to make sure that you are pacing the workshop session appropriately!
Total time: 115 (min)
Activities in this session:
- Same-task group work (20 min) on investigating perimeter
- Same-task group work (10 min) on data collection
- Whole class dialogue (10 min) on data collection
- Same-task group work (10 min) on data collection
- Same-task group work (20 min) on assessment of responses
- Same-task group work (10 min) on collecting and interpreting data
- Same-task group work (20 min) on making use of ICT in EBL
- Open space(10 min).
- Agreeing follow-up activities(5 min).
If you have printed this session for offline use, you may also need to download the following assets:
- Video/Noxolo 3D shapes 1.3 AfL3 recording.m4v (local play / download options / download from dropbox)
